hoist setup to get an 8hp engine into the LBC using the main haliard and the boom and the main sheet and a pulley at the end of the boom!!
i've set a 'vang' type line to the jib fairleads/cams to control lateral movement, and the mainsheet will will keep rear movement in control - then the pulley is hand pulled (no winch unfortunately) but there is a cam
i set up a rope harness for the outboard, which also may help lifting from above on deck with 2 of us and i've added a wee line from midway along the boom hanging free and reacheable in/out of boat, to help control the swinging in and for keeping it swung out initially
|
|
|
|
|
|
|
|
|
|
|